Kappa 350

類　　型：: 剪剝設備

品　　牌：: komax

顏　　色：: 其他

產(chǎn)品描述：: Kappa 350 是一款動力站機器，采用雙葉片原理處理直徑達 120 mm2、最大外徑為 35 mm 的圓形導體。它具有皮帶傳動或各種驅動輥，可用于電線運輸?？汕袚Q的壓力單元可調(diào)節(jié)驅動單元的接觸壓力以適應加工步驟。先進的傳感器技術確保消除切割損失。這些在上橫截面范圍內(nèi)特別重要。

Wire ? cross-section, stranded wires*	2.5 – 120 mm2 AWG14 – 5/0
Max. outside diameter	35 mm (1.38 in.)
Length accuracy repeatability	Repeat accuracy
	±(0.2%+1 mm (0.04 in.))
Flat wire processing	–
Wire length range	1 mm – 800000mm (0.039 in. – ? 874.9 yd.)
Max. wire transport speed	4.8 m/s (189 in./s)
Max. strip length full stripping	Side 1: 290 mm (11.42 in.)
	Side 2: 150 mm (5.9 in.)
Max. strip length partial strip	Side 1: 999.9 mm (39.37 in.)
	Side 2: 999.9 mm (39.37 in.)
Max. strip length semi strip	Side 1: 999.9 mm (39.37 in.)
	Side 2: 999.9 mm (39.37 in.)
Programmable ? intermediate strip, number and length	programmable
	(No limitations in terms of ? number and length)
Automatic ? conductor detector (automatic detection of cut depth)	standard
Cable ? detector(queue, end and slip monitoring, zero-cut optimization, outer ? diameter measurement)	standard
Number of blade positions	2 blade positions (+1 slitting ? blade)
Wire end detection	–
Length measuring system	standard
Straightener unit	optional (external)
IOCS interface (expandable)	3 (6)
USB/standard ethernet	standard
Noise level
Drive system	Belt or roller drive
Production table	standard
Electrical connection	110/230 VAC ±10% 50/60 Hz 1.2 ? kVA
Pneumatic connection	5–8 bar (73–116 psi)
Dimensions (W×H×D)	1090 × 1425 × 890 mm
	(42.9 × 56.1 × 35 in.)
Weight	approx. 270 kg (595.2 lb)
*?? ? Kappa machines can process many conductors outside the indicated ? cross-section range, but certain extremely hard, tough wires may not be able ? to be processed, even if they are within the indicated cross- ubt, we are ? happy to provide you with samples of your wires.